Do Not unplug the device until the software update is complete. The device is receiving a software update over the local Wi-Fi network. If the blinking remains constant, the device is connected to the local Wi-Fi network but not the Savant Host. The device is connecting to your network and establishing communication with the Savant Host or Savant App. The device is ready to be connected to the local Wi-Fi network The device has established communication with both the local Wi-Fi network and Savant Host. More than 1 minute – Device can't locate the Wi-Fi network it was formerly connected to. The state will change once boot is complete. The Savant 1.x products use the following codes on their LED status lights.
UDP packets are broadcast on ports 914.Do not utilize a Guest Network to set up the various Savant devices to a network.Therefore, all devices communicating with a Savant device must be added to the same subnet (Ex: 192.168.1.xxx). All Savant devices use self-discovery methods.Network should employ one of the network security formats shown above.Ensure that the network router can handle the additional IP Addresses that will be added through the Savant network.
#Savant home control install#
#Savant home control how to#
After reading this guide, you will have a better understanding and be more informed of how the Savant 1.x system operates, what possible common snags can occur, and how to fix these issues. The information in this guide should be read and understood in its entirety prior to contacting the Savant Support Team. This Network Troubleshooting Guide can be used to troubleshoot any problems that may occur during setup or normal use. The SAV-REM-KIT1-00 entertainment package uses a local Wi-Fi® network to operate. Savant 1.x Remote and Host Entertainment Package To access the link to the topics in this document, click the topic text. 1.x Network Troubleshooting Guide Document Number: